Cla-val X144 Quick Manual User Manual download pdf

X144 e-FlowMeter

Quick Start Installation & Removal Instructions

X144 e-FlowMeter Included Hardware

patent pending

Complete

e-FlowMeter

Assembly

Parts List

1) X144 e-FlowMeter Assembly with

20 foot cable

2) Installation Kit containing:

a) Insertion Tool

b) Locking Collar with Thumb Set Screw

(a and b come assembled)

Locking

Collar

Thumb Set

Screw

Complete Installation Kit

a) Insertion Tool

Installation Kit Part Numbers:

Small (2.5” - 6” + 8” reduced Port): 208450-21K

Large (8” Full Port - 16”): 208450-20A

Step-By-Step X144 e-FlowMeter Installation Instructions

CLA-VAL

Isolation Valves

Step 2A:

Loosen Knurled Lock Nut on e-FlowMeter Assembly

Step 2B: Pull apart. Straighten Measurement Cylinder by

hand. Set aside Sensor/Head in safe location,

protecting sensor tip

Sensor/Head Assembly

Threaded Swivel Insert

Step 3A: Screw Locking Collar on straight threads. Insert

angled end of provided tool as shown, until it stops

Step 3B: Tighten Thumb Set Screw

Measurement

Cylinder

Thumb Set Screw

Locking Collar

Step 4: Apply Teflon® tape to NPT Threads

• Check threads on valve

• Use thread chasing tool (not supplied), if

necessary

flow

Step 1: Take necessary safety precautions

• Isolate the control valve using main line

isolation valves

• Bleed pressure from valve before removing

body plug

• Remove an inlet body plug

NOTE: If both inlet body tappings are used for

the pilot system, consult factory for correct

modification instructions.

sensor

tip

Score Marks

Thumb Set Screw

tape not supplied

1 2 3 4

X144 e-FlowMeter 1

Summary of Contents

Page 1 - X144 e-FlowMeter

X144 e-FlowMeterQuick Start Installation & Removal Instructions X144 e-FlowMeter Included Hardwarepatent pendingCompletee-FlowMeter AssemblyParts

Page 2

X144 e-FlowMeterQuick Start Installation & Removal Instructions 7651098Step 5: Insert straightened Swivel Insert/MeasurementCylinder Assembly into

Page 3

X144 e-FlowMeterQuick Start Installation & Removal Instructions X144e-Flow Meterwhitebrown78CAUTION:Do not connect Pulse Output Circuit and 4-20mA

Page 4

X144 e-FlowMeterQuick Start Installation & Removal Instructions Before3Step 3: • Remove the e-FlowMeter Sensor/Head Assembly bypulling straight o

Comments to this Manuals

No comments

Cla-val X144 Quick Manual User Manual

Browse online or download User Manual for Equipment Cla-val X144 Quick Manual. Cla-Val X144 Quick Manual User Manual [it]

Summary of Contents

Comments to this Manuals

Related products and manuals for Equipment Cla-val X144 Quick Manual